How to light up sky lanterns...???
1.Choose a safe launch site. In the vast majority of cases, sky lanterns are perfectly safe and fun. Usually, the sky lantern climbs gently into the sky, the candle or rag inside eventually runs out of fuel, and the balloon floats harmlessly to the ground. However, because they're powered by an open flame and are often made of flammable tissue paper, there's always the chance, however small, that a sky lantern can burn out of control. Use common sense when choosing a launch site. Here are just a few things to consider:
- Pick a spot free from obstruction. Parks and wide open fields are great for this purpose. There should be no trees, roofs, power lines, or other possible obstructions in the immediate area when you launch your sky lantern.
- Don't launch sky lanterns in areas where dry timber is present. Because of the small risk of fire, it's best not to launch sky lanterns where dead wood, foliage, or grass is present. Keep in mind that sky lanterns can drift fairly far before they land, and though the internal flame has usually burnt out by this point, there's still the risk that embers may remain.
- Finally, know your local laws. Don't launch sky lanterns in areas where it's illegal. Most local jurisdictions have laws regarding fireworks and other types of entertainment involving open flame. Obey these laws - it's not worth getting a fine over.
2.Launch during good weather. Sky lanterns are meant to hang tranquilly in the sky, providing a beautiful sight for miles around. Try to launch sky lanterns during calm, clear, still nights. Don't launch sky lanterns when there's a strong wind or a chance of rain. Inclement weather can put a damper on your festivities by making it difficult to launch a sky lantern in the first place or even knocking your balloon out of the sky.
3.Open your lantern. When you're ready to launch your lantern, gently check to ensure the hole at the bottom of the balloon is open and the balloon material is secured to the frame. At this point, if you haven't done so, you may attach your candle or fuel-soaked rag by securing it to its seat at the bottom of the frame. For wire frames, this usually means pulling the wires through the center and twisting around the fuel source.
4.Fill your lantern with air. Before launching, you want to ensure your balloon is fully inflated with air so that none of the material hangs inward. Not only does this make it easier to get the lantern off the ground, it also makes it less likely that the balloon's material will drift over the flame and catch fire. Grab the balloon by the bottom of its frame and gently swing the lantern back and forth (as you would with a trash bag) until it's full.
5.Light the fuel source. Whether you're using a fuel-soaked towel, a candle, or another fuel source, it's time for ignition. Keeping the balloon vertical, light the fuel and allow the hot air from the flame to inflate the balloon. It may take a minute or two for your lantern to become buoyant - as you wait, hold on to the sides to keep the balloon open and vertical.
6.Let go and enjoy! Wait until you begin to feel a gentle upward tug, then simply let your balloon go - there's no need to throw it. Your sky lantern should float up into the night sky as it gives off a beautiful warm glow. Enjoy this peaceful, magical experience.
3.Open your lantern. When you're ready to launch your lantern, gently check to ensure the hole at the bottom of the balloon is open and the balloon material is secured to the frame. At this point, if you haven't done so, you may attach your candle or fuel-soaked rag by securing it to its seat at the bottom of the frame. For wire frames, this usually means pulling the wires through the center and twisting around the fuel source.
4.Fill your lantern with air. Before launching, you want to ensure your balloon is fully inflated with air so that none of the material hangs inward. Not only does this make it easier to get the lantern off the ground, it also makes it less likely that the balloon's material will drift over the flame and catch fire. Grab the balloon by the bottom of its frame and gently swing the lantern back and forth (as you would with a trash bag) until it's full.
5.Light the fuel source. Whether you're using a fuel-soaked towel, a candle, or another fuel source, it's time for ignition. Keeping the balloon vertical, light the fuel and allow the hot air from the flame to inflate the balloon. It may take a minute or two for your lantern to become buoyant - as you wait, hold on to the sides to keep the balloon open and vertical.
- If you're worried about the possibility of your sky lantern immediately collapsing and burning up, don't be afraid to have a hose or a bucket of water on hand.
6.Let go and enjoy! Wait until you begin to feel a gentle upward tug, then simply let your balloon go - there's no need to throw it. Your sky lantern should float up into the night sky as it gives off a beautiful warm glow. Enjoy this peaceful, magical experience.
- If the thought of watching your sky lantern slowly drift out of view makes you sad, tie a light, non-flammable string to its frame so that you can hold on to it like a kite.